To customize a coat with a horn button toggle button garment, you will need the following materials and tools:
- Coat or jacket
- Horn buttons
- Toggle buttons
- Matching thread
- Measuring tape
- Chalk or fabric marker
Here's a step-by-step guide to customizing your coat:
Prepare your coat: Start by selecting a suitable coat or jacket for customization. Make sure it has a front closure that allows for buttons or toggles.
Choose the buttons: Select horn buttons for the front closure and toggle buttons for the toggles. Horn buttons have a natural and rustic look that complements many coats. You can find a variety of horn buttons in craft stores or online.
Measure and mark button placement: Use a measuring tape to determine the appropriate placement for the buttons. Mark the positions with chalk or a fabric marker. Typically, the buttons are placed vertically down the front of the coat, with the top button located near the collar and the remaining buttons spaced evenly below it.
Sew the horn buttons: Thread a needle with matching thread and tie a knot at the end. Starting from the inside of the coat, insert the needle through the marked position for the first horn button. Bring it back up through the buttonhole of the button, and then back down through the fabric to secure it. Repeat this process for each horn button, ensuring they are sewn on tightly.
Measure and mark toggle placement: Determine the desired placement for the toggles on the coat. Common positions include the bottom hem or around the waist area. Mark the positions using chalk or a fabric marker.
Attach the toggle buttons: Thread a needle with matching thread and tie a knot at the end. Starting from the inside of the coat, insert the needle through the marked position for the first toggle button. Pass the needle through the holes or loops on the toggle button, and then back down through the fabric to secure it. Repeat this process for each toggle button, ensuring they are sewn on securely.
Test the functionality: Once all the buttons and toggles are attached, test their functionality by closing and opening the coat. Make sure they are secure and can withstand regular use.
Finishing touches: Trim any excess thread and give your coat a final inspection to ensure all buttons and toggles are securely attached. Remove any chalk or fabric marker marks if visible.
By following these steps, you can successfully customize your coat with horn button toggle button garments. Remember to take your time, sew carefully, and enjoy the process of personalizing your garment!If you want to custom Coat Horn Button Toggle，contact us.